Sunbeam Rapier Owners Club
Sunbeam Rapier Owners Club
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Technical
 Help!
 WEber Carburettor - Identification
 New Topic  Reply to Topic
 Printer Friendly
New posts at top
New posts at bottom
Author Previous Topic Topic Next Topic  

bigt80

United Kingdom
935 Posts

Posted - 28 Aug 2017 :  10:15:36  Show Profile  Reply with Quote
Or these chaps who I have found very helpful over the years.

https://burlen.co.uk/


Cheers. G
Go to Top of Page

Stella

France
127 Posts

Posted - 25 Aug 2017 :  08:12:07  Show Profile  Reply with Quote
Webcon UK Ltd, Middlesex, 01932 787100

these folk may be able to help you..
Go to Top of Page

Jim

United Kingdom
9 Posts

Posted - 11 Aug 2017 :  10:20:34  Show Profile  Reply with Quote
Thank you very much for the info
It will be a great help when I start to overhaul the carb
Now to find an reconditioning kit
Go to Top of Page

pruyter

Netherlands
199 Posts

Posted - 11 Aug 2017 :  09:49:05  Show Profile  Reply with Quote
It has to be the Weber 28/36 a carburettor quite common in the sixties and used on cars like Ford Cortina and others. This carburettor was a common exchange for the usual Rootes carburettors on both the Alpines and Rapiers. Although the same carburettors were used on Rootes engines the jetting differed for 1500, 1592 and 1725 engines.
For your Rapier with the 1725 cc engine the jetting is as follows:

Choke Primary 25
Choke Secondary 27
Venturi Primary 4.5
Venturi Secondary 4.5
Main jet Primary 135
Main jet Secondary 165
Air jet Primary 220
Air jet Secondary 180
Emulsion tube Primary F30
Emulsion tube Secondary F30
Idle jet Primary 55
Idle jet Seconday 70
Pump jet 70
Go to Top of Page

Jim

United Kingdom
9 Posts

Posted - 10 Aug 2017 :  22:06:15  Show Profile  Reply with Quote
My Series V Rapier is fitted with a Weber Carburettor (See Photos)
Can someone please identify the model and if possible the correct jets that should be fitted

I would like to fit a plenum chamber to quieten the roar when accelerating hard

As an alternative I am thinking that a Ramflo filter may fit (see last photo)

Any suggestions or comments would be greatly appreciated

Regards to all and TIA to those who answer











Edited by - Jim on 10 Aug 2017 22:07:33
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
New posts at top
New posts at bottom
Jump To:
Sunbeam Rapier Owners Club © 2009 Sunbeam Rapier Owners Club Go To Top Of Page
Snitz Forums 2000